The method to avoid the back image of printing self-adhesive labels

In the process of printing self-adhesive labels, sometimes due to various factors, back-to-back images will appear. Is there any solution? Of course there is. I don't know if you have encountered such a problem. If you encounter it accidentally, you should pay attention. It is recommended to know the preventive measures in advance. You are not afraid of this. You only need to know how to solve it. Let's take a look at how to avoid this situation.

First of all, choose the material carefully. If the material is not selected properly, there will be back glue. For cylindrical bottles, especially those with a diameter of less than 30mm, choose carefully.

Secondly, if you encounter a situation where the label is too large or too small, pay attention to this.

Third, when the object to be attached is uneven or spherical, it should be noted that for these objects, the type, thickness, adhesive, etc. of the label material should be comprehensively considered. aspect.

Fourth, pay attention to the labeling of some corrugated boxes with rough surface: the varnish on the surface of the carton will affect the labeling.

5. Labeling automatic labeling machine can carry out labeling test when necessary.

6. Pay attention to whether there is high temperature during export transportation and use, and try to avoid it.

Seventh, the environment with a lot of water and oil will also affect the performance of the adhesive, so pay attention.

Soft PVC surfaces can sometimes release plasticizers, so be sure to choose the right adhesive.